Auto-detection Upon launching, the software will automatically detect hardware. Successfully recognized devices will display in real-time under the "Device List" on the left (as shown in the image: "table lamp," "AL-1001").
2. Core Control Mode
Supports both "individual control" and "group control" operation modes to meet personalized needs across different scenarios.
(1) Individual Device Independent Control Customizable
Applicable Scenarios
When you want different devices to display distinct colors or effects (e.g., synchronizing screen "AL-1001" with video content while a "table lamp" displays a breathing effect).
Operation Steps
In the device list on the left, click the specific device name you wish to configure (the text will typically highlight when selected). In the settings area on the right, adjust the device's color, brightness, and mode.
These changes apply only to the currently selected device and do not affect other devices.
(2) Group Control Mode One-Click · Up to 10 Devices
Applicable Scenarios
When multiple devices are connected simultaneously and you wish to maintain a unified lighting style across all devices to create a cohesive ambiance.
Operation Steps
Click "Group Control" at the top left. All devices will immediately synchronize to the current settings (on/off, color, mode), enabling seamless coordination.
Ensure the device is properly connected via USB. If "No devices found" appears, check if the USB cable is securely plugged in, or try a different USB port.
3. Top Tab Settings Precision Dimming
(1) Installation Method
Select the installation method based on the position of the LED strip's output end.
If the output end of the light strip is on the left, the light captures screen colors in a clockwise direction. Choose a left-to-right installation method.
If the output end of the light strip is on the right, the light captures screen colors in a counterclockwise direction. Choose a right-to-left installation method.
(2) Adjusting the Number of LEDs
Use the slider or left/right arrows to set the number of LEDs (dragging left decreases the number, dragging right increases it). The software will allocate color data based on the number of LEDs.
(3) Screen Synchronization Area
Screen color sampling areas are categorized as "Screen Edge" or "Screen Center." Customize the synchronization range between light strips and the screen. Recommended: Screen Center
4. Light Strip Control Zone Core Operations
(1) Power Control
Tap the power button in the center of the interface to quickly turn the light strip on or off.
(2) Brightness and Color Adjustment
Use two sliders to control light color and brightness respectively.
Top slider (color bar): Drag to adjust the light color. The square on the right previews the currently selected color. Click the "Color Preview Box" to open the color palette and customize your own color.
Lower slider (brightness bar): Drag to adjust overall brightness (left to dim, right to brighten).
(3) Mode Switching
HSLIGHT offers three lighting modes to meet the ambiance needs of daily life, entertainment, and other scenarios.
Sync
Gaming ModeRecommended — Low latency captures fast-changing flashes and explosions on screen, enhancing the game's intensity and visual impact.
Movie Mode — Smooth transitions, immersive ambiance. Soft lighting transitions create a comfortable, theater-like atmosphere.
Dynamic
Tap the circular icon on the right side of the "Dynamic" area to activate one of seven preset dynamic effects, including gradient, flame simulation, breathing flash, and wave gradient.
Drag the slider below to adjust the animation speed (left to slow down, right to speed up).
Rhythm
Computer RhythmRecommended — The software directly captures the computer system's audio output signal. Responds accurately, unaffected by external environmental noise, and synchronizes light effects even when wearing headphones.
Controller Rhythm — Utilizes the high-sensitivity microphone built into the light strip controller. Captures external sounds like speech, applause, or music from external speakers.
Adjust audio recognition sensitivity by dragging the progress bar slider (left to decrease, right to increase).
III
Common Issues and Solutions
Issue
Possible Cause
Solution
Light strip does not turn on
Power disconnected / Software not running
Check the USB connection and click the central power button to turn it on.
Abnormal colors
Lighting effect direction is reversed
Click "Installation Method" and switch between "Left to Right" or "Right to Left".
Dynamic/Rhythm mode not working
Mode icon not selected correctly
Click the circular icon in the corresponding mode area and ensure the icon is highlighted.
Incomplete light strip display
Incorrect LED/Pixel count setting
Click "LED points" and set the correct number of LEDs.
IV
Safety and Privacy Statement
Local Processing Only
All color processing and audio analysis by HSLIGHT is performed locally on your device. No screen content or audio data is collected, stored, or uploaded.
V
Technical Support
For unresolved issues, please contact us through the following channels:
